Executed 13 Sep 2011, Deidre, Lowell Obs

From NRAO:

AIPS 1:    1    2 D75NA       .MASTER.    1 MA 13-SEP-2011 11:07:12
AIPS 1:    2    2 D75NA       .ICL001.    1 MA 13-SEP-2011 11:08:16
AIPS 1:    3    2 D75R        .ICL001.    1 MA 13-SEP-2011 11:09:34
AIPS 1:    4    2 D75CVL      .ICL001.    1 MA 13-SEP-2011 11:10:39

   B.4 use the master cube to blank the full resolution cube and the robust=0.5 cube

DEFAULT BLANK
opcode 'IN2C';outclass 'LMV';
DPARM 1,0,1000,-1000,0               $This is the line that was omitted before.
indi 4; outdi 4; in2di 4

getn *NA.ICL001  $the full resolution cube, the one created at step 7B
get2n *.MASTER
>getn 2
AIPS 1: Got(1)   disk= 4  user=   2   type=MA   D75NA.ICL001.1
>get2n 1
AIPS 1: Got(2)   disk= 4  user=   2   type=MA   D75NA.MASTER.1

=====> AIPS 1:    5    2 D75NA       .LMV   .    1 MA 13-SEP-2011 11:11:56

DEFAULT BLANK
opcode 'IN2C';outclass 'LMV';
DPARM 1,0,1000,-1000,0               $This is the line that was omitted before.
indi 4; outdi 4; in2di 4

getn *.ICL001  $the full resolution cube, the one created at step 7B
get2n *.MASTER
>getn 3
AIPS 1: Got(1)   disk= 4  user=   2   type=MA   D75R.ICL001.1
>get2n 1
AIPS 1: Got(2)   disk= 4  user=   2   type=MA   D75NA.MASTER.1


=====> AIPS 1:    6    2 D75R        .LMV   .    1 MA 13-SEP-2011 11:12:45


9.  ON THE ROBUST CUBE

9.1  Transposing the cube

DEFAULT TRANS
outclass ''; blc 0; trc 0; transcod '312'
indi 4; outdi 4; in2di 4

getn *.LMV
>getn 6
AIPS 1: Got(1)   disk= 4  user=   2   type=MA   D75R.LMV.1

=====> AIPS 1:    7    2 D75R        .TRANS .    1 MA 13-SEP-2011 11:13:53


9.2   Switching the header from frequency description to spectral-line velocity description

getn *. TRANS
ALTSW

=====> already there

9.3    Final products               

A. Moment maps:

DEFAULT XMOM
flux -10000; icut -10000; blc 0; trc 0
indi 4; outdi 4; in2di 4

getn *.TRANS
>getn 7
AIPS 1: Got(1)   disk= 4  user=   2   type=MA   D75R.TRANS.1


=====> 
AIPS 1:    8    2 D75R        .XMOMNC.    1 MA 13-SEP-2011 11:29:54
AIPS 1:    9    2 D75R        .XMOM0 .    1 MA 13-SEP-2011 11:29:54
AIPS 1:   10    2 D75R        .XMOM1 .    1 MA 13-SEP-2011 11:29:55
AIPS 1:   11    2 D75R        .XMOM2 .    1 MA 13-SEP-2011 11:29:55
AIPS 1:   12    2 D75R        .XMOM3 .    1 MA 13-SEP-2011 11:29:56


9.4  Primary Beam Corrections

***Corrects an image for the primary beam attenuation of the 25-meter antennas used at the VLA.

altsw $PBCOR needs the FREQ axis rather than the velocity one 
      $ use this verb to switch between the two

DEFAULT PBCOR
doinvers -1; coord 0; bparm 0; outclass 'X0_PBC'
indi 4; outdi 4; in2di 4

>getn 9
AIPS 1: Got(1)   disk= 4  user=   2   type=MA   D75R.XMOM0.1
>altsw

=====> AIPS 1:   13    2 D75R        .X0_PBC.    1 MA 13-SEP-2011 11:30:25

>altsw
>getn 13
AIPS 1: Got(1)   disk= 4  user=   2   type=MA   D75R.X0_PBC.1
>altsw


9.5   Replacing blanks with 0

DEFAULT REMAG 
pixval 0; blc 0; trc 0; outclass 'X0_P_R'
indi 4; outdi 4; in2di 4

getn *.X0_PBC
>getn 13
AIPS 1: Got(1)   disk= 4  user=   2   type=MA   D75R.X0_PBC.1

=====> AIPS 1:   14    2 D75R        .X0_P_R.    1 MA 13-SEP-2011 11:30:57


10.  ON THE NATURAL CUBE

10.1  Transposing the cube                          

DEFAULT TRANS
outclass ''; blc 0; trc 0; transcod '312'
indi 4; outdi 4; in2di 4

>getn 5
AIPS 1: Got(1)   disk= 4  user=   2   type=MA   D75NA.LMV.1

=====> AIPS 1:   15    2 D75NA       .TRANS .    1 MA 13-SEP-2011 11:31:56


10.2  Switching the header from frequency description to spectral-line velocity description

getn *. TRANS
ALTSW  

=====> already there

10.3  Final products  

A. Moment maps:

DEFAULT XMOM
flux -10000; icut -10000; blc 0; trc 0
indi 4; outdi 4; in2di 4

getn *.TRANS
>getn 15
AIPS 1: Got(1)   disk= 4  user=   2   type=MA   D75NA.TRANS.1

=====> 
AIPS 1:   16    2 D75NA       .XMOMNC.    1 MA 13-SEP-2011 11:49:47
AIPS 1:   17    2 D75NA       .XMOM0 .    1 MA 13-SEP-2011 11:49:48
AIPS 1:   18    2 D75NA       .XMOM1 .    1 MA 13-SEP-2011 11:49:48
AIPS 1:   19    2 D75NA       .XMOM2 .    1 MA 13-SEP-2011 11:49:48
AIPS 1:   20    2 D75NA       .XMOM3 .    1 MA 13-SEP-2011 11:49:49


10.4  Primary Beam Corrections

***Corrects an image for the primary beam attenuation of the 25-meter antennas used at the VLA.

altsw $PBCOR needs the FREQ axis rather than the velocity one 
      $ use this verb to switch between the two


DEFAULT PBCOR
doinvers -1; coord 0; bparm 0; outclass 'X0_PBC'
indi 4; outdi 4; in2di 4

>getn 17
AIPS 1: Got(1)   disk= 4  user=   2   type=MA   D75NA.XMOM0.1
>altsw

=====>  AIPS 1:   21    2 D75NA       .X0_PBC.    1 MA 13-SEP-2011 11:50:28

>altsw
>getn 21
AIPS 1: Got(1)   disk= 4  user=   2   type=MA   D75NA.X0_PBC.1
>altsw


10.5    Replacing blanks with 0

DEFAULT REMAG 
pixval 0; blc 0; trc 0; outclass 'X0_P_R'
indi 4; outdi 4; in2di 4

getn *.X0_PBC
>getn 21
AIPS 1: Got(1)   disk= 4  user=   2   type=MA   D75NA.X0_PBC.1

=====> AIPS 1:   22    2 D75NA       .X0_P_R.    1 MA 13-SEP-2011 11:51:09


11. Convolutions

DEFAULT BLANK
opcode 'IN2C';outclass 'LMV';
DPARM 1,0,1000,-1000,0               $This is the line that was omitted before.
indi 4; outdi 4; in2di 4

getn *.CONVL  
get2n *.MASTER
>getn 4
AIPS 1: Got(1)   disk= 4  user=   2   type=MA   D75CVL.ICL001.1
>get2n 1
AIPS 1: Got(2)   disk= 4  user=   2   type=MA   D75NA.MASTER.1

=====> AIPS 1:   23    2 D75CVL      .LMV   .    1 MA 13-SEP-2011 11:51:50


ON THE CONVOLVED CUBE

11.1   Transposing the cube 

DEFAULT TRANS
outclass ''; blc 0; trc 0; transcod '312'
indi 4; outdi 4; in2di 4

>getn 23
AIPS 1: Got(1)   disk= 4  user=   2   type=MA   D75CVL.LMV.1

=====>  AIPS 1:   24    2 D75CVL      .TRANS .    1 MA 13-SEP-2011 11:53:04


11.2 Switching the header from frequency description to spectral-line velocity description

getn *. TRANS
ALTSW

=====> already there

11.3  Final products

A. Moment maps:

DEFAULT XMOM
flux -10000; icut -10000; blc 0; trc 0
indi 4; outdi 4; in2di 4

getn *.TRANS
>getn 24
AIPS 1: Got(1)   disk= 4  user=   2   type=MA   D75CVL.TRANS.1

=====> 
AIPS 1:   25    2 D75CVL      .XMOMNC.    1 MA 13-SEP-2011 12:09:31
AIPS 1:   26    2 D75CVL      .XMOM0 .    1 MA 13-SEP-2011 12:09:32
AIPS 1:   27    2 D75CVL      .XMOM1 .    1 MA 13-SEP-2011 12:09:32
AIPS 1:   28    2 D75CVL      .XMOM2 .    1 MA 13-SEP-2011 12:09:33
AIPS 1:   29    2 D75CVL      .XMOM3 .    1 MA 13-SEP-2011 12:09:33


11.4  Primary Beam Corrections

altsw $PBCOR needs the FREQ axis rather than the velocity one 
      $ use this verb to switch between the two

DEFAULT PBCOR
doinvers -1; coord 0; bparm 0; outclass 'X0_PBC'
indi 4; outdi 4; in2di 4

>getn 26
AIPS 1: Got(1)   disk= 4  user=   2   type=MA   D75CVL.XMOM0.1
>altsw

=====> AIPS 1:   30    2 D75CVL      .X0_PBC.    1 MA 13-SEP-2011 12:10:10

>altsw
>getn 30
AIPS 1: Got(1)   disk= 4  user=   2   type=MA   D75CVL.X0_PBC.1
>altsw


11.5  Replacing blanks with 0

DEFAULT REMAG 
pixval 0; blc 0; trc 0; outclass 'X0_P_R'
indi 4; outdi 4; in2di 4

getn *.X0_PBC
>getn 30
AIPS 1: Got(1)   disk= 4  user=   2   type=MA   D75CVL.X0_PBC.1

=====> AIPS 1:   31    2 D75CVL      .X0_P_R.    1 MA 13-SEP-2011 12:10:48


12. Write out data

DEFAULT FITTP
indi 4; outdi 4; in2di 4

>getn 5
AIPS 1: Got(1)   disk= 4  user=   2   type=MA   D75NA.LMV.1
>dataout '/tb/ddo75/corblank/DDO75_NA_LMV.FITS

>getn 6
AIPS 1: Got(1)   disk= 4  user=   2   type=MA   D75R.LMV.1
>dataout '/tb/ddo75/corblank/DDO75_R_LMV.FITS

>getn 8
AIPS 1: Got(1)   disk= 4  user=   2   type=MA   D75R.XMOMNC.1
>dataout '/tb/ddo75/corblank/DDO75_R_XMOMNC.FITS

>getn 9
AIPS 1: Got(1)   disk= 4  user=   2   type=MA   D75R.XMOM0.1
>dataout '/tb/ddo75/corblank/DDO75_R_XMOM0.FITS

>getn 10
AIPS 1: Got(1)   disk= 4  user=   2   type=MA   D75R.XMOM1.1
>dataout '/tb/ddo75/corblank/DDO75_R_XMOM1.FITS

>getn 11
AIPS 1: Got(1)   disk= 4  user=   2   type=MA   D75R.XMOM2.1
>dataout '/tb/ddo75/corblank/DDO75_R_XMOM2.FITS

>getn 12
AIPS 1: Got(1)   disk= 4  user=   2   type=MA   D75R.XMOM3.1
>dataout '/tb/ddo75/corblank/DDO75_R_XMOM3.FITS

>getn 13
AIPS 1: Got(1)   disk= 4  user=   2   type=MA   D75R.X0_PBC.1
>dataout '/tb/ddo75/corblank/DDO75_R_X0_PBC.FITS

>getn 14
AIPS 1: Got(1)   disk= 4  user=   2   type=MA   D75R.X0_P_R.1
>dataout '/tb/ddo75/corblank/DDO75_R_X0_P_R.FITS

>getn 16
AIPS 1: Got(1)   disk= 4  user=   2   type=MA   D75NA.XMOMNC.1
>dataout '/tb/ddo75/corblank/DDO75_NA_XMOMNC.FITS

>getn 17
AIPS 1: Got(1)   disk= 4  user=   2   type=MA   D75NA.XMOM0.1
>dataout '/tb/ddo75/corblank/DDO75_NA_XMOM0.FITS

>getn 18
AIPS 1: Got(1)   disk= 4  user=   2   type=MA   D75NA.XMOM1.1
>dataout '/tb/ddo75/corblank/DDO75_NA_XMOM1.FITS

>getn 19
AIPS 1: Got(1)   disk= 4  user=   2   type=MA   D75NA.XMOM2.1
>dataout '/tb/ddo75/corblank/DDO75_NA_XMOM2.FITS

>getn 20
AIPS 1: Got(1)   disk= 4  user=   2   type=MA   D75NA.XMOM3.1
>dataout '/tb/ddo75/corblank/DDO75_NA_XMOM3.FITS

>getn 21
AIPS 1: Got(1)   disk= 4  user=   2   type=MA   D75NA.X0_PBC.1
>dataout '/tb/ddo75/corblank/DDO75_NA_X0_PBC.FITS

>getn 22
AIPS 1: Got(1)   disk= 4  user=   2   type=MA   D75NA.X0_P_R.1
>dataout '/tb/ddo75/corblank/DDO75_NA_X0_P_R.FITS

>getn 23
AIPS 1: Got(1)   disk= 4  user=   2   type=MA   D75CVL.LMV.1
>dataout '/tb/ddo75/corblank/DDO75_CVL10_LMV.FITS

>getn 25
AIPS 1: Got(1)   disk= 4  user=   2   type=MA   D75CVL.XMOMNC.1
>dataout '/tb/ddo75/corblank/DDO75_CVL10_XMOMNC.FITS

>getn 26
AIPS 1: Got(1)   disk= 4  user=   2   type=MA   D75CVL.XMOM0.1
>dataout '/tb/ddo75/corblank/DDO75_CVL10_XMOM0.FITS

>getn 27
AIPS 1: Got(1)   disk= 4  user=   2   type=MA   D75CVL.XMOM1.1
>dataout '/tb/ddo75/corblank/DDO75_CVL10_XMOM1.FITS

>getn 28
AIPS 1: Got(1)   disk= 4  user=   2   type=MA   D75CVL.XMOM2.1
>dataout '/tb/ddo75/corblank/DDO75_CVL10_XMOM2.FITS

>getn 29
AIPS 1: Got(1)   disk= 4  user=   2   type=MA   D75CVL.XMOM3.1
>dataout '/tb/ddo75/corblank/DDO75_CVL10_XMOM3.FITS

>getn 30
AIPS 1: Got(1)   disk= 4  user=   2   type=MA   D75CVL.X0_PBC.1
>dataout '/tb/ddo75/corblank/DDO75_CVL10_X0_PBC.FITS

>getn 31
AIPS 1: Got(1)   disk= 4  user=   2   type=MA   D75CVL.X0_P_R.1
>dataout '/tb/ddo75/corblank/DDO75_CVL10_X0_P_R.FITS