# CHARACTER_SET_NAME=American_America.US7ASCII / Copyright (c) 2006, 2015, Oracle and/or its affiliates. All rights reserved. / / NAME / proclus.msg / DESCRIPTION / Generic error messages for Oracle Local Registry (OLR) / NOTES / Language : American / Character set : US7ASCII / WARNING: A single message in this table should NOT exceed 75 characters / If it does the message will be TRUNCATED. / / NOTE TO DEVELOPER: / When a message number is added or delete from this file,procus.msg / must be modified accordingly if applicable. / Please do not fill holes in the message numbers because the / unused message numbers might be used by OCR messages in procus.msg / NOTE TO TRANSLATOR: / These OLR messages should be translated almost identical / to the corresponding OCR messages in procus.msg. / / RANGE / 00001 - 00060 : OLR / 30 : Unused / 34 : Unused / 43 : Unused / 45 : Unused / 47 : Unused / 50 : Unused / 52 : Unused / / 00101 - 00109 : OLR Component Errors / 108 : Unused / / 00201 - 00208 : OLR Permission Errors / / 00251 - 00253 : OLR Storage Layer Errors / 251 : Unused / 252 : Unused / / 00300 - 00310 : OLR configuration success / / OWNER / / MODIFIED / dbagaria 02/10/15 - Bug 22227690: OCR to write config changes to CALOG / dbagaria 02/10/15 - Bug 19708639: Add message 60 / sbezawad 12/15/14 - Add messages for storage layer comp error / sbezawad 09/08/14 - Bug 19436554: Support export/import files on ASM DG / dbagaria 01/02/14 - Bug 17907999: Add message 58 / sbezawad 09/04/13 - Bug 17400494: Add message 57 / dbagaria 07/31/12 - Bug 8563982. Add message 56. / dbagaria 07/02/12 - BUG 13079572: Add message 55 / samjo 04/09/12 - Bug 13836319. Add message 110 / dtrejoh 03/12/12 - Bug 9888007. Add message when ocrcheck is used / with '-repair -add' or '-repair -delete' option. / samjo 02/14/12 - Project 33056. Changes for rolling patch / sbezawad 01/24/12 - Add message 52 / samjo 01/12/12 - Project 33056. Rolling patch / sbezawad 09/12/11 - Add PROCR_INVALID_LOCATION / sbezawad 04/07/11 - Add PROCR_INVALID_BACKUPLOC / sbezawad 11/15/10 - Add message for fail fast error / samjo 08/27/09 - Migration to GIPC. / sbezawad 06/03/09 - Add PROCR_UPGRADING_FORMAT / samjo 05/28/09 - Fix Action. / samjo 10/28/08 - Add PROCR_CLSCRS_ERROR message / sbezawad 12/10/08 - Add PROCR_BATCH_EMPTY / sbezawad 12/01/08 - Change 107 / sbezawad 09/18/08 - Add PROCR_CLSI_ERROR / samjo 03/05/08 - Change 201 / samjo 08/06/07 - Project 18350. Adding ASM error / kelee 03/19/07 - Modify for 5-way mirroring / samjo 01/16/07 - Add PROCR_INVALID_CONFIG / samjo 11/20/06 - Add PROCR_NO_MORE_OPERATIONS / spommere 10/30/06 - add PROCR_INVALID_BLOCKNUM, PROCR_INVALID_BLOCKHDR / kelee 07/14/06 - Creation / / / Message headers / ///////////////////////////////////////////////////////// / Error message for olr / Range from 1 - 60 ///////////////////////////////////////////////////////// / 0001,0, "Oracle Local Registry cannot be initialized." // *Cause: An invalid init level was passed to initialize Oracle Local // Registry. // *Action: Initialize Oracle Local Registry with a valid init level. / 0002,0, "Cannot perform local registry operation at the current init level." // *Cause: Program tried a local registry operation which is not permitted // at the init level. // *Action: Initialize Oracle Local Registry with an appropriate init level. / 0003,0, "Cannot perform local registry operation because context is invalid." // *Cause: The Oracle Local Registry context passed was invalid. // *Action: This is an internal error. Contact Oracle Support Services. / 0004,0, "The local registry key to be operated on does not exist." // *Cause: Program tried a local registry operation on a key which does not // exist. // *Action: Check to see if the key exists and try the operation again. / 0005,0, "User does not have permission to perform a local registry operation on this key." // *Cause: Program tried an operation on a local registry key for which it // does not have permission. // *Action: Check to see if program is run as the correct user. / 0006,0, "User does not have permission to perform a local registry operation on this key." // *Cause: Program tried a local registry operation on a key for which it // does not have permission. // *Action: Check to see if program is run as the correct user. / 0007,0, "Cannot perform local registry operation because the key or batch handle is invalid." // *Cause: The local registry key or batch handle passed was invalid. // *Action: This is an internal error. Contact Oracle Support Services. / 0008,0, "Cannot perform local registry operation because one of the parameters is invalid." // *Cause: Program tried a local registry operation using an invalid // parameter. // *Action: This is an internal error. Contact Oracle Support Services. / 0009,0, "Cannot perform local registry operation because the buffer passed is too small." // *Cause: The amount of memory allocated for the buffer was insufficent. // *Action: This is an internal error. Contact Oracle Support Services. / 0010,0, "Cannot delete the local registry key as subkeys exist." // *Cause: The program tried to delete a key for which subkeys exist. // *Action: This is an internal error. Contact Oracle Support Services. / 0011,0, "Cannot perform local registry operation because key is NULL." // *Cause: The local registry key passed was NULL. // *Action: This is an internal error. Contact Oracle Support Services. / 0012,0, "Out of heap memory." // *Cause: The program ran out of heap memory. // *Action: Contact Oracle Support Services. / 0013,0, "Cannot perform local registry operation because one of the parameters is NULL." // *Cause: Program tried a local registry operation using an NULL parameter. // *Action: This is an internal error. Contact Oracle Support Services. / 0014,0, "Unknown error occurred" // *Cause: This is generic internal error for Oracle Local Registry. // *Action: This is an internal error. Contact Oracle Support Services. / 00015,0, "Failed to initialize the local registry" // *Cause: The Oracle Local Registry could not be accessed. The // possible causes are: // 1. The local registry has not been formatted. // 2. The local registry file is not accessible. // 3. The local registry file has incorrect permissions. // 4. Oracle Clusterware is not running. // *Action: // 1. Run the 'ocrcheck -local' command to confirm that the OLR is // formatted and usable. // 2. Run 'ocrcheck -local -config' command to retrieve the configured // file, and verify that the file is accessible and has the // correct permissions via native platform or OS methods // 3. Run 'crsctl check crs' command to verify that Oracle Clusterware // is running. / 00016,0, "Cannot retrieve any more subkeys for the given keyhandle" // *Cause: The key has no more subkeys to enumerate. // *Action: This is an internal error. Contact Oracle Support Services. / 00017,0, "Unimplemented feature" // *Cause: Requested feature has not been implemented in the current release. // *Action: Try the feature again in the upcoming Oracle release. / 00018,0, "The value size passed is too large" // *Cause: Cannot set a value of the given size. // *Action: This is an internal error. Contact Oracle Support Services. / 00019,0, "Cannot create more subkeys for the key" // *Cause: An attempt was made to create more subkeys under a key that is not // permitted by the local registry. // *Action: This is an internal error. Contact Oracle Support Services. / 00020,0, "ORACLE_HOME environment not set" // *Cause: ORACLE_HOME environment not set. // *Action: Make sure that the ORACLE_HOME environment variable has been // properly set and exported. / 00021,0, "Maximum permitted depth of the OLR tree is reached" // *Cause: An attempt was made to create subkeys under a key which is already // at depth PROCR_MAX_KEY_DEPTH // *Action: This is an internal error. Contact Oracle Support Services. / 00022,0, "The OLR backend has an invalid format" // *Cause: An attempt was made to use OLR before initializing it. // *Action: Use the root.sh script. The 'ocrconfig -local -upgrade' command // will initialize OLR. / 00023,0, "Error in retrieving hostname" // *Cause: An error occurred while retrieving hostname. // *Action: Contact Oracle Support Services. / 00024,0, "Error in the messaging layer" // *Cause: An error occurred in the messaging layer while performing a // local registry operation. // *Action: This is an internal error. Contact Oracle Support Services. / 00025,0, "Error in the NLS services" // *Cause: An error occurred in the NLS services while performing a // local registry operation. // *Action: This is an internal error. Contact Oracle Support Services. / 00026,0, "Error while accessing the physical storage" // *Cause: The Oracle Local Registry could not be accessed. The // possible causes are: // 1. The local registry has not been formatted. // 2. The local registry file is not accessible. // 3. The local registry file has incorrect permissions. // *Action: // 1. Run the 'ocrcheck -local' command to confirm that the OLR is // formatted and usable. // 2. Run 'ocrcheck -local -config' command to retrieve the configured // file, and verify that the file is accessible and has the // correct permissions via native platform or OS methods / 00027,0, "Error in authentication layer" // *Cause: An error occurred in the authentication layer while performing a // local registry operation. // *Action: Contact Oracle Support Services. / 00028,0, "Oracle Local Registry already in current version" // *Cause: An attempt to upgrade the local registry which has already been // upgraded. // *Action: No action required. / 00029,0, "Error in logging layer" // *Cause: An error occurred in the logging layer while performing a // local registry operation. // *Action: This is an internal error. Contact Oracle Support Services. / /30 is not applicable to OLR / 00031,0, "Storage device for the local registry is too small" // *Cause: The configured storage device for local registry was too small. // *Action: Refer to the documentation and configure a storage device that // is large enough for use by local registry. / 00032,0, "Oracle High Availability Services on the local node is not running" // *Cause: Oracle High Availability Services on the local node was not running // *Action: Run 'crsctl start crs' command to start the Oracle High // Availability Services on the local node. / 00033,0, "Oracle Local Registry is not configured" // *Cause: Oracle Local Registry configuration was not present on the node. // *Action: Install and configure Oracle Clusterware. / /34 is not applicable to OLR / 00035,0, "Cannot perform local registry operation due to invalid version" // *Cause: The operation cannot be performed for this local active version // *Action: Complete the upgrade before retrying the operation / 00036,0, "No free space to perform this operation" // *Cause: There is no free space left to perform the requested operation // *Action: Free up space and retry the operation / 00037,0, "Oracle Local Registry does not support the storage type configured" // *Cause: The configured storage type for local registry is not supported // *Action: Change the configuration of the local registry to a supported // storage type. Refer to Oracle documentation for an exhaustive list // for each platform. / 00038,0, "Requested block number is not allocated from Oracle Local Registry" // *Cause: The requested block number is not allocated from Oracle Local Registry // *Action: Retry the operation with another block number / 00039,0, "Requested block has an invalid header" // *Cause: The requested block has an invalid header // *Action: Retry the operation with another block number / 00040,0, "Cannot add more operations to the batch" // *Cause: An attempt was made to add an operation to a batch that already has // the maximum allowed operations. // *Action: This is an internal error. Contact Oracle Support Services. / 00041,0, "Oracle Local Registry is incorrectly configured" // *Cause: The local registry is incorrectly configured. // *Action: Correct the local registry configuration. / 00042,0, "User cannot access Oracle Local Registry configuration" // *Cause: Program encountered an error accessing the local registry // configuration. // *Action: Check to see if program is run as the correct user. Check that the // local registry configuration has the correct permissions. / /43 is not applicable to OLR / 00044,0, "Error in network address and interface operations" // *Cause: An error occurred in the network address and interface operations // layer while performing a local registry operation. // *Action: Contact Oracle Support Services. / /45 is not applicable to OLR / 00046,0, "Cannot perform local registry operation because the batch is empty." // *Cause: An attempt was made to execute the batch without any operations in it. // *Action: This is an internal error. Contact Oracle Support Services. / /47 is not applicable to OLR / 00048,1, "Cannot perform the Oracle Local Registry operation due to a transient error." // *Cause: A transient error occurred while performing the requested Oracle // Local Registry operation. The operation was aborted without // retrying, as requested by the client. // *Action: Retry the operation. / 00049,1, "The specified Oracle Local Registry backup location is inaccessible on the local node." // *Cause: The backup location did not exist or the required permissions were // not granted. // *Action: Ensure that the location exists and the required file creation // permissions are granted. / /50 is not applicable to OLR / 00051,0, "Error in patch management layer" // *Cause: An error occurred in the patch management layer while performing a // local registry operation. // *Action: Contact Oracle Support Services. / /52 is not applicable to OLR / 00053,0, "The configured patch level does not match the release patch level" // *Cause: The possible causes are: // 1. Oracle Clusterware was started before the patch application // had completed. // 2. Oracle Clusterware was started from a location other than the // Grid Infrastructure home that was most recently patched. // *Action: Check the Oracle High Availability Service (OHASD) log file for // details. // 1. Complete applying the patch on this node. // 2. Ensure the Oracle Clusterware is started from the Grid // Infrastructure home that was most recently patched. // Verify the patch level matches using the // 'crsctl query crs releasepatch' and the // 'crsctl query crs softwarepatch' commands. // If the problem persists, contact Oracle Support Services. / 00054, 1, "The requested OLR operation is not supported." // *Cause: An attempt was made to use an operation that is not supported. // *Action: Verify the operation is valid before resubmitting it. / 00055,1, "cannot create and set the local registry key because the key already exists" // *Cause: The program tried to create and set the local registry key // when the key already exists. // *Action: This is an internal error. Contact Oracle Support Services. / 00056, 1, "user does not have privilege to access the Oracle Local Registry" // *Cause: An operation that accesses the Oracle Local Registry was requested // by a user with insufficient privileges. // *Action: Run the command as root or administrator user. / 00057, 1, "Oracle Local Registry contains inconsistent data." // *Cause: Inconsistent data was detected in the Oracle Local Registry. // *Action: Check the availability of Oracle Local Registry backups using the // 'ocrconfig -local -showbackup' command and restore a compatible // backup. If you are not able to resolve the problem, contact Oracle // Support Services. / 00058, 1, "The file specified for backing up the Oracle Local Registry already exists." // *Cause: An operation to back up the Oracle Local Registry was // requested with an incorrect file name. // *Action: Run the command with a different file name provided as the argument. / / 00059,1, "The specified Oracle Local Registry export/import file location is not accessible." // *Cause: The specified Oracle Local Registry export/import file location // did not exist, did not have the required permissions, or did not // have sufficient disk space. // *Action: Ensure that the export/import file location exists, that its // permissions are correct, and that it has sufficient disk space. / / /60 is not applicable to OLR / 00101,0, "Operating System error [%s]" // *Cause: An error occurred in the operating system layer while performing a local registry operation // *Action: Contact Oracle Support Services. / 00102,0, "Cluster services error [%s]" // *Cause: An error occurred in the cluster services layer while performing a local registry operation. // *Action: Contact Oracle Support Services. / 00103,0, "Messaging error [%s]" // *Cause: An error occurred in the messaging layer while performing a local registry operation. // *Action: Contact Oracle Support Services. / 00104,0, "Authentication error [%s]" // *Cause: An error occurred in the authentication layer while performing a local registry operation. // *Action: Contact Oracle Support Services. / 00105,0, "Logging error" // *Cause: An error occurred in the logging layer while while performing a local registry operation. // *Action: Contact Oracle Support Services. / 00106,0, "Unidentified component error" // *Cause: An error occurred in an unidentified layer while performing a local registry operation. // *Action: Contact Oracle Support Services. / 00107,0, "Storage layer error [%s]" // *Cause: An error occurred in the storage layer while performing a local registry operation. // *Action: Contact Oracle Support Services. / 00108,0, "Unused" // *Document: NO / 00109,0, "Network address and interface operations error" // *Cause: An error occurred in the network address and interface operations // layer while performing a local registry operation. // *Action: Contact Oracle Support Services. / 00110,0, "Patch and upgrade error [%s]" // *Cause: An error occurred in the patch and upgrade management layer // while performing a local registry operation. // *Action: Contact Oracle Support Services. / 00201,0, "[%s]" 00202,0, "User [%s] does not match with initialized user" 00203,0, "Group permission set has to be PROCR_NONE if no group is passed" 00204,0, "Group [%s] is not the primary group for the user" 00205,0, "User [%s] is not a member of group [%s]" 00206,0, "User [%s] does not have permission to perform this operation" 00207,0, "Group [%s] does not have permission to perform this operation" 00208,0, "User does not have permission to perform this operation" /00251 is not applicable to OLR /00252 is not applicable to OLR 00253,0, "Configured OLR device has an invalid format" /00300 is not applicable to OLR /00301 is not applicable to OLR /00302 is not applicable to OLR /00303 is not applicable to OLR